Makita 4322 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Tool
  5. 4322
  6. Instruction manual
Makita 4322 Instruction Manual

Makita 4322 Instruction Manual

Hide thumbs Also See for 4322:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Jig Saw
MODEL 4322
MODEL 4323
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
002698

Advertisement

Table of Contents
loading

Related Manuals for Makita 4322

Summary of Contents for Makita 4322

  • Page 1 Jig Saw MODEL 4322 MODEL 4323 002698 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    Responsible manufacturer: As a result of the extensive accessory and saw blade Makita Corporation Anjo Aichi Japan program, the tool can be used for many purposes and is very well suited for curved or circular cuts. Power supply...

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

  • Page 4: Specific Safety Rules

    19. Store idle power tools out of the reach of chil- Check for the proper clearance beyond the dren and do not allow persons unfamiliar with workpiece before cutting so that the blade will the power tool or these instructions to operate not strike the floor, workbench, etc.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 002707 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”...
  • Page 6 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing saw blade 002713 CAUTION: • Always clean out all chips or foreign matter adhering to the blade and/or blade holder.

  • Page 7: Operation

    Adjusting roller 002728 Loosen the bolt on the back of the base with the hex wrench. Move the retainer so that the roller contacts the blade lightly. Then tighten the bolt to secure the base and the retainer. NOTE: • Occasionally lubricate the roller.
  • Page 8 Bevel cutting 002746 CAUTION: • Always be sure that the tool is switched off and unplugged before tilting the base. • Raise the dust cover all the way before making bevel cuts. With the base tilted, you can make bevel cuts at any angle between 0° and 45° (left or right).
  • Page 9 Dust extraction 002771 Clean cutting operations can be performed by connecting this tool to a Makita vacuum cleaner. Insert the hose of the vacuum cleaner into the hole at the rear of the tool. Lower the dust cover before operation.
  • Page 10 Rip fence (optional accessory) CAUTION: • Always be sure that the tool is switched off and unplugged before installing or removing accessories. Straight cuts 002773 When repeatedly cutting widths of 160 mm or less, use of the rip fence Steel base type will assure fast, clean, straight cuts.
  • Page 11 Circular cuts 002779 When cutting circles or arcs of 170 mm or less in radius, install the rip Steel base type fence as follows. Insert the rip fence into the rectangular hole on the side of the base with the fence guide facing up. Insert the circular guide pin through either of the two holes on the fence guide.
  • Page 12 Anti-splintering device (optional accessory) 002731 For splinter-free cuts, the anti-splintering device can be used. To install the anti-splintering device, move the base all the way forward and insert it between the two protrusions of the base. NOTE: • The anti-splintering device cannot be used when making bevel cuts. 1.

  • Page 13: Maintenance

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 14 Memo...
  • Page 15 Memo...
  • Page 16 Makita Corporation Anjo, Aichi, Japan 884187D220...

This manual is also suitable for:

4323

Table of Contents