Installing Isofix Child Seats - Tesla S Owner's Manual

Child Safety Seats

Installing ISOFIX Child Seats

Lower ISOFIX anchor positions are provided in the
second-row seats and are located between the
seat's back rest and rear cushion. The exact
location of each anchor is identified by a child safety
seat identification button, illustrated below. The
button is located on the seat back, directly above its
associated anchor. Some Model S vehicles have
two ISOFIX seating positions (outboard seating
positions only) whereas others have three.
On vehicles with the center ISOFIX position, you
can install two ISOFIX seats adjacent to each other
only if you install one of the seats on the right
(passenger side) and the other in the center, as
illustrated below. To seat three children, use a seat
belt retained seat in the center position.
On vehicles without the center ISOFIX position,
install ISOFIX seats in the outboard seating
26
positions only and always use a seat belt retained
seat in the center position.
To install a ISOFIX retained child safety seat, slide
the safety seat latches onto the anchor bars until
they click into place. Carefully read and follow the
instructions provided by the child safety seat
manufacturer.
Once installed, test the security of the installation
before seating a child. Attempt to twist the child
safety seat from side to side and try to pull it away
from the seat, then check that the anchors are still
securely in place.
Model S Owner's Manual