Tesla S Owner's Manual page 130

Instructions for Transporters
Connect the Tow Chain
The method used to connect the tow chain depends
on whether Model S is equipped with a towing eye
(located in the front trunk).
If not equipped with a towing eye:
1. Connect the tow chains to the large hole on
each of the rearmost lower suspension arms.
2. To protect the underbody from any damage that
could be caused by the tow chains, place a 2" x
4" piece of wood between the tow chains and
the underbody.
Caution: Before pulling, position the wood
between the tow chain and the underbody to
ensure the underbody is protected from any
damage that could be caused by the tow chain.
If equipped with a towing eye:
1.
Remove the nose cone.
Insert a plastic pry tool into the top right corner,
and gently pry the nose cone towards you.
When the clip releases, pull the nose cone
130
towards you, without twisting or bending it, to
release the three remaining clips.
2.
Insert the towing eye.
Fully insert the towing eye (found in the front
trunk) into the opening on the right side, then
turn counter-clockwise until securely fastened.
3. Attach the tow chain to the towing eye.
Caution: Before pulling, make sure the towing
eye is securely tightened.
Model S Owner's Manual