Wiper Blades And Washer Jets - Tesla S Owner's Manual

Hide thumbs Also See for S:
Table of Contents

Advertisement

Wiper Blades and Washer Jets

Checking and Replacing Wiper
Blades
To make wiper blades easy to access, shift Model S
into Park, then use the touchscreen to move them to
the service position. Touch Controls > Settings >
Vehicle > Service Mode > ON.
Note: Wipers automatically return to their normal
position when you shift Model S out of Park.
Periodically check and clean the edge of the wiper
blade and check the rubber for cracks, splits and
roughness. If damaged, replace the blade
immediately to prevent damage to the glass.
Contaminants on the windshield, or on the wiper
blades, can reduce the effectiveness of the wiper
blades. Contaminants include ice, wax spray from
car washes, washer fluid with bug and/or water
repellent, bird droppings, tree sap, and other
organic substances.
Follow these guidelines for cleaning:
Clean the windshield using non-abrasive glass
cleaner.
Wipe the blades clean using isopropyl (rubbing)
alcohol or washer fluid.
If the wipers remain ineffective after cleaning,
replace the wiper blades.
For optimum performance, wiper blades should be
replaced at least once a year.
To replace wiper blades:
1.
Lift the wiper arm away from the windshield.
2.
Press the locking tab while sliding the blade
down the arm.
3.
To install the new blade, align the new blade on
the wiper arm and slide it toward the hooked
end of the arm until it locks into place.
4.
Place the wiper arms with the blades against
the windshield.
104
If the problem persists with new blades, clean the
windshield and wiper blades using a soft cloth or
sponge and warm water with non-detergent soap.
Then, rinse the windshield and wiper blades with
clean water. The windshield is clean when water
beads do not form.
Caution: Only use cleaning products approved
for use on automotive glass and rubber.
Inappropriate products can cause damage or
smears, and create glare on the windshield.
Caution: Only install replacement blades that
are identical to the original blades. Using
inappropriate blades can damage the wiper
system and affect the operation of the rain
sensor.
Cleaning Washer Jets
The position of the windshield washers is set at the
factory and should never need adjusting.
If a windshield washer becomes blocked, use a thin
strand of wire to clear any blockages from the
nozzle.
Warning: Do not operate the washers while
cleaning Model S. Windshield washer fluid can
irritate eyes and skin. Read and observe the
washer fluid manufacturer's instructions.
Model S Owner's Manual

Advertisement

Table of Contents
loading

Table of Contents