Advertisement
Setting Oven
Controls
Setting
Recipe
Recall
This feature
will only recall a bake, convection
bake, convection
roast, slow cook, or cook time. This feature
will not work with
any other function.
One recipe
can be saved for each oven.
To program
the oven to begin baking
immediately
and record a
recipe (Bake at 425°F):
1.
Select Upper or Lower oven. Press Bake.
2.
Press 4 2 5.
3.
Press and hold START until a beep
indicates that the recipe
has been recorded
for future
recall.
If you do not wish to
continue
cooking
at this time
press STOP.
To begin baking
using a stored recipe:
1.
Place food
in oven.
2.
Press UPPER or LOWER
oven.
3.
Press Bake or any other function
where
recipe
has been
saved and then
press _.
V
4.
The temperature
(and cook time if programmed)
is recalled,
the oven will begin cooking
the recorded
recipe.
Restoring
Factory
Default
Settings
Your appliance
is programmed
with
default
control
settings.
Over time, the following
options
may have been changed
since
the appliance
was new. If you choose to restore default
settings,
all user preferences
will be restored
to their original
settings.
•
12 or 24 hour display
mode
•
Continuous
Bake or 12 Hour Energy Savings
mode
•
Silent or audible
control
•
Oven temperature
display
(Fahrenheit
or Celsius)
•
Oven temperature
adjustments
(UPO)
•
Stored
recipes
•
Meat
Probe setting
•
Accent
Light setting
To restore
oven control to factory
default
settings:
1.
When
the oven is in idle and no cooking
function
is in oper-
ation,
press and hold the 7 key until the acceptance
tone
sounds (about
6 seconds).
2.
Press START. The control
is now reset to default
settings.
Adjusting Oven Temperature
The temperature
in the oven is pre-set at the factory.
Before
adjusting,
be sure to follow
recipe
times and temperatures.
Test
a recipe
by using a temperature
setting
higher
or lower than the
recommended
temperature.
Important:
Do not use thermometers
such as those found
in
grocery
stores to check
the temperature
settings inside the oven.
These thermometers
may display
temperatures
that vary greatly
from the actual
temperature.
The baking
results should
help you to decide
how much of an
adjustment
is needed.
If you think the oven is cooking
too hot or
too cool, you can adjust the actual
oven temperature
to be 35°F
(19°C) more or 35°F less than the default
setting
of 0.
To adjust the oven temperature
higher
by 30°:
1.
Press Broil for 6 seconds.
UPO 0 will appear
in the display.
2.
Press the numeric
keypad
30.
3.
Press _(_
to accept
the new temperature
change
offset
or
press STOP to reject the change
if necessary.
To adjust the oven temperature
lower by 30°:
1.
Press Broil for 6 seconds.
UPO 0 will appear
in the display.
2.
Press the numeric
keypad
30.
3.
Press the Self Clean
key to change
the 30 to a - 30. By
pressing
Self Clean the value will change
from plus to minus
or from minus to plus.
4.
Press _(_
to accept
the temperature
change
offset
or
press STOP to reject the change
if necessary.
32
Advertisement
