Makita 3620A Instruction Manual page 8

Straight guide (optional accessory)
The straight guide
i s
effectively used for
straight cuts when chamfering or grooving.
To install the straight guide, insert the
guide bars into the holes in the tool base.
Adjust the distance between the bit and
the straight guide. At the desired distance,
tighten the wing bolts to secure the straight
guide in place.
1 J
When cutting, move the tool with the straight guide flush with the side of the workpiece.
If the distance (A) between the side of the
workpiece and the cutting position is too
wide for the straight guide, or if the side
of the workpiece i s not straight, the
straight guide cannot be used.
In
this case,
firmly clamp a straight board to the work-
piece and use
it
as a guide against the
router base. Feed the tool in the direction
of the arrow.
8