Table of Contents
Advertisement
A
_L WARNING:
Never leave
the router unattended
while it is
running or before it comes to a
complete
stop.
4.
To lock the switch in the OFF
position, push the ON/OFF
switch down to turn the switch
OFF, and remove the safety
key from the switch panel.
Electric
receptacles
17
Dust Shield
Two electric receptacles are located
at the back of the switch assembly (Fig. 17). Use one for plugging in the router. The
other may be used to plug in a vacuum or a light (not included). Two dust shields are
designed to protect the receptacles.
,_
WARNING:
To ensure safety and reliability,
the total current drawn from the
two units must be less than 15 Amps.
NOTICE: The diameter
of the vacuum adapter
in the fence assembly
is 2-1/4 in.
diameter;
select the vacuum accordingly.
ADJUSTING
THE FENCE
,_
WARNING:
Failure to unplug your router before performing
adjustments
to
the router or table could result in accidental
starting causing
serious injury.
The fence enables you to support and guide the workpiece.
TO ADJUST
THE EXTENDED
FENCE FORWARD
AND
BACKWARD
(Fig. 18}
WARNING:
Failure to unplug
your router before performing
adjustments
to the router or table
could result in accidental
starting
causing
serious injury.
1.
Unplug the router.
2.
Loosen the two
clamping
knobs.
3.
4.
Fig. 18
Move the fence forward or backward along the slots to the desired position, as
shown in Fig. 18. The fence can be moved forward and backward 3-3/4 in.
Tighten the clamping
knobs.
37599
Manual_Revised_12
1219
Page 21
Hide quick links:
Advertisement
Table of Contents
