Table of Contents
Advertisement
Setting
delayed
bake
time
and
timed
bake
The delay start feature allows you to set a starting and
ending time to the baking process. Prior to setting a delay
start, be sure the time of day is set correctly. If the delay
start needs to be set more than 12 hours in advance (12-24
hours), the control must first be programmed for 24 hour
display mode. See "Setting 12 or 24 hour display modes"
section.
When the set bake time runs out:
1.
"END" will appear in the display window and the oven
will shut-off automatically (See Fig. 2).
2.
The control will beep 3 times every 30 seconds as a
reminder until the cancel key pad is pressed.
FOOD POISONING
HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
To program the oven for a delay start and to shut-off
automatically
(example
for baking at 375°F for 50
minutes and starting at 5:30):
Step
Press
1.
Press bake time.
bake
time
2.
Enter 50mintues.
5
0
3.
Press start,
start
4.
Press delay start (See Fig. 1).
delay
start
5.
Enter530.
3 0
6.
Press start,
start
7.
Press bake.
bake
Fig. 1
Fig. 2
After the delay start feature has activated and started
the cooking process, press the bake time pad to display
the bake time remaining.
The delay start feature may be used with the convect
or convect convert cooking features. Bake time will
not operate when using the broil or convect broil
features.
Setting
quick
preheat
Use the quick preheat feature for single rack baking to
quickly heat the oven. Use this feature only for standard
baking. A reminder tone will sound indicating when to place
the food in the oven.
When the oven is finished preheating, quick preheat will
change to the bake feature and continue to bake until
cancelled.
To set quick preheat with a default set temperature
of 350°F:
Step
Press
quick
1.
Pressquick preheat,
preheat
2.
Press start (See Fig. 3).
start
Fig. 3
8.
Enter375.
3 7
9.
Press start,
start
22
For batter and dough-based baked good such as cakes,
pastries and breads, use the standard bake function for
best results
Advertisement
Table of Contents
