Table of Contents
Advertisement
Probe
(cont'd)
Choosing a setting for how the oven will operate
once the probe reaches the target temperature
Your oven is factory preset to automatically stop cooking
and start the keep warm feature once the probe sensor
reaches the set target temperature.
This setting may be
changed to continue cooking if desired.
Setting the option for how the oven will heat once the
probe reaches the target temperature must be done
when the oven is inactive.
The probe is not required to
be connected to the probe receptacle when setting this
option.
To set the oven to continue
cooking after reaching
the target temperature:
"_
keypad and hold for 6 seconds.
1.
Press probe
2.
Press self keypad andtoggle untilthe"Continu"
clean
message appears (Fig. 1) then press start
to accept.
Fig. 1
• During the cooking process, the internal food
temperature will display by default. To review the
target temperature,
press the probekey once. After 6
seconds the display will return to the internal food
temperature.
To assure temperature
accuracy, do not remove the
probe from the food or receptacle until the desired
internal temperature is met.
If the probe feature is active but the probe is removed
from the receptacle, the probe feature will cancel but
the oven will continue to cook.
; • If the probe is active and the probe is removed from
the food, the probe feature will remain active. The
displayed internal food temperature may no longer be
reliable. This may eventually cause a "Probe Too Hot"
message.
ii
• The oven will automatically turn OFF if the probe
sensor reaches 300°F (149°C) or more.
ii
• The probe feature cannot be set with broil,
convection
broil, or self-clean.
• To change the target temperature while cooking, press
the probe_ k eypad once. Use the numeric keypad to
ii
change the target temperature.
Press the start key to
accept any change.
To set the oven to automatically
stop cooking and
start keep warm once reaching target temperature:
1.
Press
probe
keypad
and
hold
for
6 seconds.
2.
Press self keypad and toggle until "CAnCEL"
clean
message appears (Fig. 2) then press start
to accept.
Fig. 2
27
Advertisement
Table of Contents
