Table of Contents
Advertisement
To program oven for delayed bake time
and to shut-off automatically
The delay start feature allows you to set a starting and
ending time to the baking process. Prior to setting a delay
start, be sure the time of day is set correctly. If the delay
start needs to be set more than 12 hours in advance
(12-24 hours), the control must first be programmed for
24 hour display mode. See "Setting 12 or 24 hour display
modes" section.
WARNING
FOOD POISONING HAZARD. Do not let food sit for
more than one hour before or after cooking. Doing so
can result in food poisoning or sickness.
To program the oven for a delay start and to shut-off
automatically (example for baking at 375°F for 50
minutes and starting at 5:30):
Step
1. Press bake time.
2. Enter 50 mintues.
3. Press start.
4. Press delay start (See Fig. 1).
5. Enter 530.
6. Press start.
7. Press bake.
8. Enter 375.
9. Press start.
To stop baking at anytime press cancel.
When the set bake time runs out:
1. "End" will appear in the display window and the oven
will shut-off automatically (See Fig. 2).
2. The control will beep 3 times every 30 seconds as a
reminder until the cancel key pad is pressed.
After the delay start feature has activated and started
Press
the cooking process, press the bake time pad to
display the bake time remaining.
The delay start feature may be used with the
convect or convect convert cooking features. Bake
time will not operate when using the broil or convect
broil (some models) features.
SETTING OVEN CONTROLS
Fig. 1
NOTES
Fig. 2
19
Advertisement
Table of Contents
