GE PSB42YSHASS Owner's Manual And Installation Instructions page 38

Installation Instructions
| INSTALL DOOR PANELS
Handle-
Fresh Food
Refrigerator
Door
3/4"Custom Panel
if Required
Install 1/4" Decorative Panels:
• Remove Pre-lnstalled Handles
Open door to 90 °. Remove 5 Phillips head screws
from the Fresh Food and Freezer door handles;
retain all screws. Lift off pre-installed door handles.
Install Door Panels
NOTE: Carefully push the Fresh Food panel in until
it slides into the slot behind the trim. Gently push to
opposite side. Repeat procedure for upper and lower
Freezer panels.
Install Custom Trim
Install the custom trim with the original
5 Phillips head screws. Tighten. Repeat
for Freezer door.
NOTE: Ensure that the edge of the custom trim
does not pinch the door gasket.
• 3/4" Custom Decorative Panels
If you choose to install custom wood panels, they
must be cut to dimensions shown
on pages 23-30. The panels will slide
into the frame on the doors and grille.
If using custom handles, please see Door Handles
on page 20.
IMPORTANT NOTE: Maximum custom panel
thickness must not exceed 1-1/8" thick and 70 Ibs for
the Fresh Food door, 45 Ibs total for the Freezer door
and 15 Ibs for the Grille panel.
Custom Trirr_
iiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiii
38