Installation
Instructions
3/4" FRAMED CUSTOM PANEL OPTION
For a more custom appearance,
3/4" framed custom panels
may be installed on trimmed
models. The overlay panel is
secured to a 1/4" finished backer panel. The assembled
custom panel then slides into the trim with the same procedure
described on page 37.
Door
\\
1/4"
Backer
_.
Panel
,250 + ,750 = 1,000 Maximum
Total Panel
Thickness
NOTE: Left-to-right
offset is not
equal to top-to-bottom
offset.
3/4" FULL-WIDTH OVERLAY
CUSTOM PANEL OPTION
This design provides a nearly trimless appearance.
The full width overlay
panel covers most of the door trim. In this design, a spacer panel must
be installed between the finished backer and overlay panel.
Custom
Door
_Vr_e_
1/4"
Backer
_.10
Inch
Panel
Spacer
Overlay Panel:,
, BackerPanel
NOTE: Left-to-right
offset is not equal
to top-to-bottom
offset.
,250 + ,10 + ,750 = 1,100 Maximum
Total Panel Thickness
IMPORTANT NOTE: Maximum total weight
is 70 pounds for any assembled
Fresh Food
panel, 45 pounds total for the Freezer panels
and 15 pounds for the grille panel.
22