GE Profile PSB42YGX Dimensions And Installation Information

PSB42YGX
GE Profile 42" Built-In Stainless Side-By-Side Refrigerator with Dispenser
™
Dimensions and Installation Information
Product Clearances
These refrigerators are equipped with a 2 position
door stop. The factory set 130° door swing can be
adjusted to 90° if clearance to adjacent cabinets or
walls is restricted.
130° Door Swing
B
A
D
Models A B
42" 12-3/16" 16"
Allow minimum clearances for Freezer door (Dimension
A) and Fresh Food door (Dimension B) for a full 130°
door swing and to allow for drawer removal.
Four inch (4") minimum clearance is required when
door swing is adjusted to 90°. If the 90° door stop
position is used, drawer access is maintained, but
drawer removal is restricted.
For answers to your Monogram, GE Profile
®
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
Stainless Steel Wrapped Refrigerators
Stainless Steel wrapped refrigerators have wrapped
doors and grille panels, and beveled edges. These
models are shipped ready for installation.
90° Door Swing
23-7/8"
Behind
Frame
C
D
C D
24" 4"
or
™
service,
*81-3/4"
at Rear
Depth Including
Handles 27"
Total volume and shelf
Listed by
area are calculated by
Underwriters
the Association of Home
Laboratories
Appliance Manufacturers'
standards.
25-3/8" Case Depth
41"
Case Width
42" Frame-to-Frame
* Shipping height
* The front height may be adjusted from 83-1/2"
to 84-1/2" by adjusting front and rear leveling
legs a maximum of 1" .
Specification Created 1/08
*84" From
Floor to
Top Frame
As an EnErgy STAr ®
partner, gE has determined
that this product meets the
EnErgy STAr guidelines
for energy efficiency.
210377