GE PSB42YSHASS Owner's Manual And Installation Instructions page 32

Installation Instructions
[] REMOVE PACKAGING
Refrigerator is Top-Heavy-be
careful when moving. When using an appliance
dolly, handle from Freezer side only.
• Carefully cut banding at the top and bottom;
remove outer carton.
• Slide out rear corner posts (2).
• Slide carton off top of cabinet.
NOTE: DO NOT LAY CABINET DOWN IN ORDER
TO REMOVE SKID!
• The unit is secured to the skid with six 7/16"
bolts and six 1/2" nuts.
• Remove all six 7/16" bolts that secure metal
brackets to the refrigerator.
• Remove the three 1/2" nuts and washers from
the Freezer side.
• Remove nut from rear wood block on Freezer
side.
• Tilt unit up on Freezer side toward Fresh Food
side.
• Push bolts down, remove metal bracket from
Freezer side. Remove wood block from Freezer
side.
• Slide the appliance dolly underneath the
Freezer side.
• Using corner posts (2 on front corners) to
prevent damage, secure unit to
appliance dolly.
NOTE: If corner posts are too long, cut the posts to
a shorter length.
Toel(icl(Tapedto
Top of Unit
1/2" Nuts _--.
• Lift the unit off the skid with the appliance dolly.
• Remove toekick taped to the top of the unit.
• Set toekick aside for final installation.
NOTE: DO NOT ATTEMPT TO ROLL OR DRAG UNTIL
UNIT IS OFF SKID.
NOTE: MAKE SURE THE WATER LINE IS CLEAR OF
APPLIANCE DOLLY TO AVOID DAMAGE.
32