GE CP350 Installation Instructions Manual page 7

Installation Instructions
INSTALLATION--ELECTRICAL CONNECTIONS
B]
B]
El
When making the wire connections, use the
entire length of conduit provided. The conduit
must not be shortened.
With the cooktop in place, open the front of
the cabinet door.
Insert the wires from the conduit through the
openinq of the junction box.
Ground Red __
Black
Strain Relief Clamp
r61
Connect the red and black leads from the
cooktop conduit to the corresponding leads in
the junction box.
Ground wire
location
,/_ Red
Black
r_ once the connections are made, secure wires
together using wire nuts.
Red
Strain
Ground / v Black
Relief Clamp
GROUNDING INSTRUCTIONS:
The bare ground wire in the conduit is connected
to the cooktop frame. Effective January 1, 1996,
the National Electrical Code will not permit
grounding through neutral.
If used in new construction after January i, 1996 or
in a mobile home, recreational vehicle or
if local codes do not permit grounding through
the neutral white lead, attach the appliance
grounding lead (green or copper) to the residence
grounding conductor (green or bare copper)in
accordance with local codes. When connecting
to a 3 conductor branch circuit, if local codes
permit, connect the bare ground connector lead
of the cooktop to the branch circuit neutral (gray
or white in color).
A IMPORTANT:
_f the cooktop is being
installed into a blind counter (one with no cabinet
opening below), wire connections must be made
before putting the cooktop into the cutout
opening.