Star Trac E-TR Owner's Manual page 16

6. Connecting the Display Cables
Motor Control Board
DC Power Board
NECK
Loacate the Motor Control Board (MCB) and the DC Power Board.
Service Hole
MCB Cable
Take the cables from the lower neck service hole. Use the cable
labled MCB Cable and connect it to the MCB.
Now take the FAN Power cable from the neck and connect it to the
DC Power board.
Go to the bottom of the display neck, Take the C-SAFE connector
bracket and connect it to the neck using (2) M4 x 0.7 Phillips Head
Screws.
14 STAR TRAC E SERIES TREADMILL O ' M
WNER S ANUAL