Troubleshooting; Error Messages; Troubleshooting Error Messages - Philips VL4000 User Manual

❋
VARI LITE - VL4000 S

Troubleshooting

Error Messages

If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu
Display will cycle through any applicable error message(s), one at a time until the end of the list is
reached. To review the error messages again, it will be necessary to access them using the Status
function.
To access error messages:
Step 1. Press [ESC].
Step 2. Press [Up] / [Down] arrows until Fixture appears. Press [OK].
Step 3. Press [Up]/ [Down] arrows to access Status. Press [OK]. (Display will now scroll through
any error messages or display OK if no errors).
Animation Whl1 Sensor
Animation 1 Index Sensor
Animation Whl2 Sensor
Animation 2 Index Sensor
74
L U
POT UMINAIRE SER
Display
OK
Pan Sensor
Tilt Sensor
Dimmer Sensor
Cyan Sensor
Yellow Sensor
Magenta Sensor
CTO Sensor
Color Whl1 Sensor
Color Whl2 Sensor
Gobo Whl1 Sensor
Gobo 1 Index Sensor
Gobo Whl2 Sensor
Gobo 2 Index Sensor
Prism Sensor
Prism Rotate Sensor
Prism Diverge Sensor
Frost Sensor
Frost Adjust Sensor
Zoom Sensor
' M
S ANUAL
Table A-1: Error Messages
Meaning
No Errors Found - All Sensors Responded Properly
Pan Sensor (Encoder) Error
Tilt Sensor (Encoder) Error
Dimmer Sensor Error
Cyan Color Sensor Error
Yellow Color Sensor Error
Magenta Color Sensor Error
CTO Sensor Error
Color Wheel 1 Sensor Error
Color Wheel 2 Sensor Error
Rotating Gobo Wheel 1 Sensor Error
Rotating Gobo Wheel 1 Indexing Sensor Error
Rotating Gobo Wheel 2 Sensor Error
Rotating Gobo Wheel 2 Indexing Sensor Error
Animation Wheel 1 Sensor Error
Animation Wheel 1 Indexing Sensor Error
Animation Wheel 2 Sensor Error
Animation Wheel 2 Indexing Sensor Error
Prism Mechanism Sensor Error
Prism Rotating Sensor Error
Prism Diverge Sensor Error
Frost Mechanism Sensor Error
Frost Adjustment Sensor Error
Zoom Assembly Sensor Error
24 J un e 20 14 02 .9 704.00 01 0