Philips VL4000 User Manual page 36

❋
VARI LITE - VL4000 S
Step 6. As shown in
Step 7. Install lamp fully into lamp socket, taking care not to touch lamp glass.
Step 8. Turn lamp clockwise to seat lamp into socket. Lamp base should be aligned as illustrated in
Figure
Step 9. Reinstall lamp socket cover. Make sure safety tether is completely encapsulated within lamp
socket cover.
Step 10. Disengage tilt lock to allow luminaire head to move freely.
Step 11. Align lamp as described in
18
L U '
POT UMINAIRE SER S
Figure 2-3, align lamp tabs with lamp socket.
Figure 2-3: Lamp Installation
2-4.
Figure 2-4: Installed Lamp
24 J un e 20 14
M
ANUAL
Align tabs of lamp with
socket when installing
Lamp*
"Align Lamp For Maximum Beam Irradiance" on page
NOTE: * "Bow" of
lamp must be oriented
with "Slot" in reflector.
Bow
Lamp Socket Cover
Lamp
Note alignment of fully seated lamp
Ensure lamp is completely
seated before reinstalling lamp
socket cover.
02 .9 704.00 01 0
19.