Table of Contents
Advertisement
2. Unscrew the hex-shaped regulator cap from the regulator
and remove the regulator pin.
A. Regulator pin
B. Regulator cap
3. Flip the regulator pin over and snap pin firmly into place.
A
A. LP gas position
B. Natural gas position
4. Screw the hex-shaped regulator cap securely back into
place. Do not overtighten.
A
B
B
To Convert Oven Bake/Broil Burner
1. Remove racks from inside the broiler cavity.
2. Screw the burner orifice hood away from the pins. There will
be approximately 1¹⁄₂ to 2 turns.
A
A. Burner orifice hood
NOTE: On units using Eaton Oven Safety Valve, screw the
burner orifice hood away from the pin. There will be
approximately 1¹⁄₂ to 2 turns.
3. Adjust burner air shutter to the widest opening that will not
cause the flame to lift or blow off the burner when cold.
11
Advertisement
Table of Contents
