Installation Preparation; Tools And Naterials Required; Remove Packaging - GE ZKD910 Installation Instructions Manual

Installation Preparation
TOOLS REQUIRED
Hand Saw
Drill and
1/16" Bit
Phillips Screwdriver
Safety Glasses
Measuring Tape
Level
MATERIALS REQUIRED (provided)
/4Wood Screws
MATERIALS REQUIRED (not provided)
2x2 or 2x4 2x2 or 2x4
Wood Block Lumber for
for Anti-Tip _ Runners
Security
Adhesive or other hardware for installing
runners or shelf to support warmer drawer
Runners must be level, rigidly mounted and capable
of supporting 150 pounds.
REMOVE PACKAGING
, Place carton on a flat surface.
,Open one end of the carton and lift off the top
piece.
, Lift the warmer up and out of the carton.
,Place the drawer on top of the shipping carton to
protect the drawer front and the finished flooring.
, Remove all packing materials and tape.
, Locate package containing q wood screws and set
aside.
Parts provided:
, q Wood Screws.