Shop-Vac SERIES 586 User Manual page 6

ITEM NUMBER & DESCRIPTION
1. Cap nut
2. 8" wheel
3. Axle
4. Rear frame
5. Caster socket
2
6. Front frame
1
3
11
2
10
9
1
3
6
10 4
8
9
Tank
Bottom of Tank
Machine
Screw
4
8
Dolly
Tank Hex Flat
Bottom of Tank
Nut Washer
Machine
Screw
1. Remove head from tank and place tank upside
down on a flat surface.
2. Place wheels on rear frame/axle assembly with
extended hub of wheel towards dolly frame and
ITEM NUMBER & DESCRIPTION
place cap nuts on axle. Secure with hammer.
3. Insert caster socket into front frame and secure
1. Metal tank handle
with phillips head screw.
Flat
4. Place groove in front frame into lip of tank and
Washer
2. Side tank handle
position so frame is directly above inlet.
5. Position grooves of rear frame into lip of tank
3. #10 x 3/4" Screw hex head
and align so rear and front frames engage.
3
5
SIDE TANk HANDLE ASSEMBLY
5
(Not standard with all models)
Attach side handles to tank with screws provided (Figure 46).
FOUR WHEEL HEAVY DUTY DOLLY
ASSEMBLY
(Not standard with all models)
Tools required:
(2) 1/2 inch open end wrenches, (2) 7/16 inch open end wrenches, or a socket set and a ham-
mer.
1. Insert 2 1 / inch long bolt through center hole in rear frame, attach split lockwasher and nut
2
and tighten securely.
2. Attach handle brace to back of rear frame with 5/8 inch long machine screws, lockwash-
ers, and nuts. (Finger tighten only.)
3. Position main frame inside rear frame. Attach (2) 5/8 inch long machine screws, lockwash-
ers and nuts in both sides. Tighten securely.
4. Attach handle uprights, inside main frame (make sure buttons at top face inward) using 5/8
inch long machine screws, lockwashers and nuts. (Finger tighten only.) Align holes at top
of handle braces with holes in handle uprights. Attach with 1
lockwashers and nuts. (Tighten securely.)
5. Go back and tighten machine screws at bottom of uprights and braces.
6. Attach caster sockets (open end down) to front of main frame using 5/8 inch long
machine screws, lockwashers and nuts. Insert casters into sockets.
7. Slide basket adapters on handle.
See Figure 47 and Figure 48 for correct installation of adapters.
8.
7. #8 x 1/2" lg. Screw
1
8. 1/4 - 20 x 3/4" lg.
Machine screw
9. 1/4" Flat washer
10. 1/4 - 20 Hex nut
11
11. Caster
5
7
6
5 ITEM DESCRIPTION
7
1 Cap nut
2 8" Wheel
3 Axle
4 Rear frame
ITEM DESCRIPTION
5 Caster socket
6 Front frame
7 #8 x 1/2" lg. Screw
1 Cap nut
8 1/4-20 x 3/4" lg. Machine screw
2 8" Wheel
9 1/4" Flatwasher
Dolly
10 1/4-20 Hex nut
3 Axle
11 Caster
4 Rear frame
Hex
5 Caster socket
Nut
6 Front frame
6. Secure dolly frame to tank by placing machine screws
up through holes in dolly frame. Ensure head of screw 7 #8 x 1/2" lg. Screw
1. Remove head from tank and place tank upside
is fully recessed in area provided. After machine screw
8 1/4-20 x 3/4" lg. Machine screw
down on a flat surface.
is inserted, tighten with flatwasher and hex nut.
9 1/4" Flatwasher
7. Insert caster in caster socket and apply downward
10 1/4-20 Hex nut
2. Place wheels on rear frame/axle assembly with
pressure until caster snaps into place.
11 Caster
4. Bolt 1/4 - 20 x 1/2"
8. Return vacuum to upright position. Attach carriage
extended hub of wheel towards dolly frame and
handle to tank by inserting bolt through the center hole
5. 1/4 - 20 Hex nut
place cap nuts on axle. Secure with hammer.
of handle and tank, secure with nut provided. Attach
side handles with screws provided. Be sure to spread
3. Insert caster socket into front frame and secure
6. Secure dolly frame to tank by placing machine screws
ends of carriage handle when assembling to prevent
up through holes in dolly frame. Ensure head of screw
with phillips head screw.
damage to tank.
9. Insert basket through center of carriage handle and is fully recessed in area provided. After machine screw
4. Place groove in front frame into lip of tank and
slide into place.
is inserted, tighten with flatwasher and hex nut.
position so frame is directly above inlet.
7. Insert caster in caster socket and apply downward
5. Position grooves of rear frame into lip of tank
pressure until caster snaps into place.
1
and align so rear and front frames engage. 8. Return vacuum to upright position. Attach carriage
handle to tank by inserting bolt through the center hole
ITEM DESCRIPTION
2
of handle and tank, secure with nut provided. Attach
1 Metal tank handle
side handles with screws provided. Be sure to spread
2 Handle & hardware Pkg.
ends of carriage handle when assembling to prevent (includes items 3-6)
3 3 Side tank handle
damage to tank.
4 #10 x 3/4" Screw hex head
9. Insert basket through center of carriage handle and
5 Bolt 1/4-20 x 1/2"
6 1/4-20 Hex nut
slide into place.
4 5
1
ITEM DESCRIPTION
46
2
1 Metal tank handle
2 Handle & hardware Pkg.
(includes items 3-6)
3 Side tank handle
4 #10 x 3/4" Screw hex head
5 Bolt 1/4-20 x 1/2"
6 1/4-20 Hex nut
4
1 / inch long machine screws,
4
9. Attach handle onto uprights by pushing down and holding buttons in on uprights. 11
2
10. Place tank retaining bracket through slot and bolt in rear frame and screw on knob.
5
11. Slide bumper down over main dolly frame until it bottoms out.
12. Place axle upright on a hard surface and hammer on (1) cap nut. Place (1) wheel on axle
3
and slide down to cap nut. Slide axle through rear of frame and slide on other wheel.
6
10 Before assembling cap nut on other end of axle, be certain dolly is assembled correctly.
9
(You may place tank on dolly and tighten knob of retaining bracket to be sure of correct
assembly.)
13. After ensuring dolly is assembled correctly remove tank and place dolly on side with
installed cap nut on hard surface and hammer second cap nut on axle.
14. Place accessory basket on adapters and pull out on outer rim of basket and snap into
4
place (Figure 49).
8
PART NO.
Tank
Bottom of Tank
43002-99
Machine
24250-10
Screw
24415-00
93921-00
PART NO.
75405-00
93920-00
15015-99
43002-99
09029-99
24250-10
07003-99
13001-99
24415-00
67736-00
93921-00
Flat
48
75405-00
Washer
93920-00 Handle
15015-99
Basket
09029-99
Adapter
07003-99
13001-99
67736-00
1. Handle
2. Handle upright
3. Handle brace
4. 1/4 - 20 x 1
machine screw (Black)
PART NO.
5. 1/4" External tooth
20882-00
lockwasher
93555-96
6. 1/4 - 20 Hex nut (Black)
93551-00
15039-99
7. Rear dolly frame
64012-99
13001-99
8. Main dolly frame
9. 5/16 - 18 x 2
10. 5/16" Split lockwasher
11. 5/16 - 18 Hex nut
PART NO.
20882-00
93555-96
93551-00
15039-99
64012-99
13001-99
(Not standard with all models)
1. Place casters into sockets on band assembly.
2. Place tank upside down and slip band assembly over lip on bottom of tank.
6
7
ITEM
1 Cap nut
2 8" Wheel
3 Axle
For 14" Diameter Tanks
4 Rear frame
47
5 Caster socket
Handle
6 Front frame
7 #8 x 1/2" lg. Screw
8 1/4-20 x 3/4" lg. Machine screw
9 1/4" Flatwasher
10 1/4-20 Hex nut
For 16" Diameter Tanks 11 Caster
Tank
Handle
Basket 6. Secure dolly frame to tank by placing machine screws
Basket
Adapter
up through holes in dolly frame. Ensure head of screw
is fully recessed in area provided. After machine screw
Pull Outward is inserted, tighten with flatwasher and hex nut.
on Basket
7. Insert caster in caster socket and apply downward
ITEM NUMBER & DESCRIPTION
pressure until caster snaps into place.
8. Return vacuum to upright position. Attach carriage
handle to tank by inserting bolt through the center hol
of handle and tank, secure with nut provided. Attach
side handles with screws provided. Be sure to spread
1 / " Hex head
4
ends of carriage handle when assembling to prevent
damage to tank.
9. Insert basket through center of carriage handle and
slide into place.
1
1 / " Hex head bolt
2
ITEM
2
1 Metal tank handle
1
2 Handle & hardware Pkg.
3 Side tank handle
5
4 #10 x 3/4" Screw hex head
5 Bolt 1/4-20 x 1/2"
6
6 1/4-20 Hex nut
23
4
3
2
15
14
7
5
16
5
19
17
8
15
18
BAND DOLLY ASSEMBLY
DESCRIPTION
Handle
49
12. Tank retainer bracket
13. Threaded knob
14. Axle
15. 1/4 - 20 x 5/8" Hex head
machine screw
16. 1/4 - 20 Hex nut
17. Caster socket
18. Caster
19. Bumper
20. 10" Wheel (25.4cm)
21. Cap nut
22. Accessory basket
DESCRIPTION
23. Basket adapter
4
(includes items 3-6)
22
23
15
11
10
13
12
20
9
21
15
PART
4300
2425
2441
9392
7540
9392
1501
0902
0700
1300
6773
PART
2088
9355
9355
1503
6401
1300