Table of Contents
Advertisement
Quick Links
ATTENTION!
Read all safety rules careful-ly
before attempting to oper-ate.
Retain for future reference.
DANGER!
Never operate this unit when
flammable materials or vapors
are present because electrical
devices produce arcs or sparks
that can cause a fire or explo-
sion.
NEVER OPERATE
UNATTENDED!
User manual. Please review before operating vac.
Shop Vac
Wet/Dry Vacuums
®
SERIES 586, 587, 610, 850, 925, 950, 962, 965, 970, 984, 991
Commercial/Industrial Use
Description
The Shop-Vac
Wet/Dry vacuum cleaners are for vacuuming wet and dry non-volatile materials. Equipped with powerful,
®
permanently lubricated, Single or Two-Stage By-Pass motors. Standard filtration systems to handle dry or wet pick-up. Double
filtration is available for most Shop-Vac
or easy roll caster system. Automatic float shut off prevents overflow during wet pick-up. Includes versatile 1-1/4" (3.18cm), 1-1/2"
(3.81cm) or 2-1/2" (6.35cm) diameter accessories. Tank styles include steel with rust resistant epoxy phenolic coated interiors,
durable stainless steel and rugged dent resistant polypropylene tank. UL listed.
Vacs and is standard on Shop-Vac
Commercial Vacuums. Equipped with heavy duty dolly
®
®
BRAND
BRAND/MARQUE/MARCA
Advertisement
Table of Contents
Related Manuals for Shop-Vac 586 Series
Summary of Contents for Shop-Vac 586 Series
- Page 1 Wet/Dry vacuum cleaners are for vacuuming wet and dry non-volatile materials. Equipped with powerful, ® permanently lubricated, Single or Two-Stage By-Pass motors. Standard filtration systems to handle dry or wet pick-up. Double filtration is available for most Shop-Vac Vacs and is standard on Shop-Vac Commercial Vacuums. Equipped with heavy duty dolly ®...
-
Page 2: Important Safety Instructions
These are very fine particles that may pass through the foam and affect the dropped, damaged, left outdoors or dropped into water, contact Shop-Vac Corporation for performance of the motor or be exhausted back into the air. Additional collection filter bags assistance. - Page 4 ASSEMBLY REAR CASTER DOLLY/TOOL HOLDER TOP HANDLE ASSEMBLY AND FRONT CASTER FEET ASSEMBLY To attach top handle, align holes in handle and holes in motor cover and secure with screws provided (Figure 1). (Not standard with all models) You will find four casters (c.), two caster feet (d.), rear caster dolly/tool holder (e.), and four screws with your wet/dry vacuum.
- Page 5 REAR WHEEL DOLLY/TOOL HOLDER 2. Place axle upright on a hard surface and hammer on (1) cap nut. Place (1) wheel on axle and slide down to cap nut (Figure 18). Be sure flat side of wheel hub is facing outward. AND FRONT CASTER FEET ASSEMBLY 3.
- Page 6 Attach handle onto uprights by pushing down and holding buttons in on uprights. ITEM NUMBER & DESCRIPTION 10. Place tank retaining bracket through slot and bolt in rear frame and screw on knob. 1. Cap nut 7. #8 x 1/2" lg. Screw 11.
-
Page 7: Tool Holder
Do not pick up flammable, combustible, or hot materials. Do not use Dry Pickup around explosive liquids or vapors, as electrical devices produce arcs See the Shop-Vac Vacuum filter Reference and Installation chart on page 3 to determine ® or sparks which can cause a fire or explosion - do not use at filling which type of dry filtration is best for your needs. - Page 8 Insert hose collar onto into accessory and twist to into accessory and twist to Do not attempt to service your Shop-Vac ® wet/dry vacuum cleaner beyond that described in tank and twist to form a threaded tank inlet and form a tight fit.
-
Page 9: Troubleshooting Chart
Full Polyester Filter SHOP-VAC VACUUM FILTER ® Brush off dirt and reinstall; Foam Sleeve if filter gets wet, rinse Reusable Disc Filter Rinse with soap and with water, dry and Rinse with soap and water, dry and reinstall...