Download  Print this page

Attaching The Work Bowl; Attaching The Work Bowl Cover - KitchenAid 5KFP0925BCU0 Instructions Manual

Hide thumbs

Advertisement

Attaching
the Work
Bowl
I. Place the Food Processor
on a dry,
level countertop
with the controls
facing forward.
Do not plug in the Food
Processor
until it is completely
assembled.
2. Place the work
bowl on the base, aligning
the raised portion
with the indentation
on
the base. The center
hole should fit over
the power
shaft.
3. Grasp the work
bowl handle and turn
the bowl counterclockwise
to lock it
on the base.
Attaching
the
Work
Bowl
Cover
I. Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
\\
2. Fit the food pusher into the 3-in- I
feed tube. See "Using the 3-in- I Feed
Tube" for details on working
with
different
sized foods.
NOTE:
Your Food Processor
wilt not
operate
Unless the work
b0w! and Work
b0w! cover are properly
locked on the
base, and the large pusher
iSinserted
to
the
maximum
fill line on the feed tube
(approximately
halfway down).
4. Select the accessory
you would
like to use
and install it according
to the instructions
on the following
pages.
NOTE:
Be sure to install the desired
accessory
before attaching
the work
bowl Cover.
NOTE:
Be sure to install the desired
accessory
before
attaching
the work
bowl cover.
12

Advertisement

loading