Assembling The Food Processor; Before First Use; Attaching The Work Bowl - KitchenAid KFP0924 Instructions Manual

aSSEMblINg ThE FOOd PROCESSOR

Before first use

Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
Grasp the feed tube on the work bowl
1
cover and turn it clockwise to remove it
from the work bowl.
attaching the wor_k bowl
IMPORTaNT: Place the Food Processor on a dry, level countertop with the controls facing
forward. Do not plug in the Food Processor until it is completely assembled.
Place the work bowl on the base,
1
aligning the raised portion with the
indentation on the base. The center hole
should fit over the power shaft.
8
Before using your Food Processor for the
first time, wash all parts and accessories
either by hand or in the dishwasher (see
"Cleaning the Food Processor" section).
NOTE: Your Food Processor is shipped
with the work bowl cover installed on the
work bowl, with the mini-bowl inside the
work bowl.
2
Power_ Shaft
Lift out the mini-bowl.
Grasp the work bowl handle and turn
2
the bowl counterclockwise to lock it
on the base.