How To Use The Sharpening Holder - Makita PLANER JOINTER 2004 Instruction Manual

0
To replace carbon brushes, use the
(-1
minus
screwdriver equipped to remove
the
holder
cap on the motor housing. Then replace the
brush.
HOW T O USE T H E SHARPENING HOLDER
0
First, loosen the 2 wing nuts on the holder
and insert blades Aand B as in figure
a t
right,
so that they contact side C and D.
Then tighten wing nuts.
0
Immerse dressing stone in water .Jr 2 or 3
minutes before sharpening. Iiold the holder
so that blades both contact the dressing
stone for simultaneous sharpening
a t
the
same angle.
Wing nut
- w
I
I O