Connecting To Wireless Broadband Router By Web Browser - Digisol DG-BR4400AC User Manual

2-2

Connecting to wireless broadband router by web browser

After the network connection is built, the next step is to setup the router with proper
network parameters, so it can work properly in your network environment.
Before you can connect to the router and start configuration procedures, your
computer must be able to get an IP address automatically (use dynamic IP address). If
it's set to use static IP address, or you are unsure, please follow the below mentioned
instructions to configure your computer to use dynamic IP address:
If the operating system of your computer is....
Windows 95/98/Me
Windows 2000
Windows XP
Windows Vista/Windows 7
Windows 8
DG-BR4400AC User Manual
- please go to section 2-2-1
- please go to section 2-2-2
- please go to section 2-2-3
- please go to section 2-2-4
- please go to section 2-2-5
18