Download Print this page

Kenmore ULTRACLEAN 665.1281 Series Use & Care Manual page 16

Hide thumbs Also See for ULTRACLEAN 665.1281 Series:

Advertisement

Available languages

Available languages

The removable
rack allows you to wash larger items such as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from dishwasher.
To remove the rack
1. To gain access to the track stops, pull the upper rack forward about halfway
out of the tub.
2. To open, flip the track stop toward the outside of the tub.
3. After opening both track stops, pull top rack out of the rails.
4.
Track stop closed
Close track
stops and slide the tracks
back into the dishwasher.
Track
stop
open
To replace the rack
1. Gently pull tracks forward
in dishwasher until they stop. Open track stops.
2. Place the back wheels on each side of the rack into the track slot and roll them back into the tracks, but do not push the rack
all the way into the tub.
3.
Insert front rack wheels on each side of the rack into the track slots.
4. Slide the rack into the dishwasher. The stops will automatically
close when rack enters dishwasher.
The removable top rack allows you to wash larger items such
as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack
from the dishwasher.
To remove the rack..
To gain access to the removable tabs on the tracks/rails,
pull
the upper rack forward
about halfway
out of the tub.
On one side, press the tab on the track in and pull up the front
end of the rack out of the track. Then repeat this step on the
other side to completely
remove the front end of the rack.
Then remove the back end of the rack, by pulling the back end
out with a slightly forward then upward motion.
To replace
the rack..
Pull the tracks forward
about halfway
out of the tub.
Along the sides of the racks are round attachment
tabs. Align
the rack's back end attachment
tabs with the cutout in the
track. Push down into place.
Pull the tracks completely
out, and align the rack's front end
attachment
tabs with the cutout in the track. Push down into
place. You will hear a snap when the front end of the rack is
secured into place on each side.
Removal
16

Advertisement

loading

This manual is also suitable for:

Ultraclean 665.1283 series