Voltage | 230 V~ Frequency | 50 Hz Ferm products are manufactured to high quality stan- Power input | 1550 W dards they are safe and fit for purpose at time of sale, but No-load speed | 6000/min...
Page 3
OPERATIONAL SAFETY Remove adjusting keys and wrenches Ensure that they are removed from the tool before swit- SPARE PARTS LIST FAG-230 Warning! ching on. Never use the machine for grinding magnesium workpieces. Use fibre reinforced discs only. Avoid unintentional starting...
Page 4
Secure the mains cable in the plug cord grip firmly. properly. The motor is defective. Take to your Ferm Dealer. Fit a 13-amp fuse. If a 13amp (BS1363) plug is used a (BS Ensure the threaded part of the spindle is covered by the 1362) ASTA approved 13-amp fuse must be fitted.