Hard Drive - HP 250 G4 Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket.
Description
For use only in HP Notebook models:
2-TB, 5400-rpm, hybrid 8 GB SSD, 9.5 mm
1-TB, 5400-rpm, hybrid 8 GB SSD
For use in all models:
1-TB, 5400-rpm, 2.5-in
750 GB, 5400 rpm, 2.5 in
500-GB, 5400-rpm, 7-mm
For use only in HP 250/256 G4 Notebook models:
500-GB, 7200-rpm, 7-mm
Hard Drive Hardware Kit (includes brackets and connector)
For use with all drives except 1 TB drives
For use with 1 TB drives
Hard drive cable
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the hard drive:
1. Disconnect the hard drive cable from the system board (1).
2. Remove the three Phillips PM2.0×2.4 screws (2) that secure the hard drive assembly to the computer.
42 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 32).
Optical drive on page
Bottom cover on page
33), if installed.
39).
Spare part number
801808-005
731999-005
778192-005
778190-005
778186-005
703267-005
813949-001
829319-001
830311-001