Bottom cover
Description
Bottom cover
For use in HP Notebook models:
●
With an optical drive
●
Without an optical drive
For use in HP 250/256 G4 Notebook models:
●
With an optical drive
●
Without an optical drive
Before removing the bottom cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
To remove the bottom cover:
1.
Position the computer upside down with the front toward you.
2.
Remove the two rubber bumpers from rear of the bottom of the computer (1)
3.
Remove the 11 Phillips PM2.5×8.0 screws (2) that secure the bottom cover to the computer.
Battery on page
32).
Optical drive on page
33), if installed.
Component replacement procedures
Spare part number
813937-001
813939-001
814614-001
816606-001
39