Hyundai DVR 400 User Manual page 126

Record key does not start recording
· Make sure there is a recordable (DVD+RW, DVD+R) disc inside the recorder.
· If you wish to record from RF input, check the program table to see the available channels.
You may need to do an APS (Automatic program search) again to record, if the automatic
search after installation has failed to find channels.
· If you wish to record from the SCART, CVBS, S-Video or DV input source, make sure that
the record source is active and sending signals.
· To record from a DVD player the DVD should not be copy protected.
· If there is no space left on the disc you will see the error message "disc is full." Erase some
titles to create space for new recordings.
Switch to a source, but there is no signal
· Make sure the antenna is connected to RF input and there is TV broadcast on some chan-
nels.
· If you are using scart, CVBS, S-Video or DV video inputs, make sure the record source is
properly connected and switched on.
Timer recording does not work
· Make sure that the system time and record start time are set correctly.
Time will be displayed when the recorder switches to standby in power saving off mode.
· Make sure that the program number of the scheduled record is on the program list.
You will not be able to record, if the program number found during APS does not contain an
active channel.
Edit disc option is disabled
· Make sure that the recorder is in "full stop mode".
Your country doesn't exist in „Country Selection" list in setup menu.
· Select „Other" option.
Audio is not proper in tuner mode.
· Make sure right country is selected before APS or manual search.
· Make sure right audio standard is set for related program in Modify Channel menu.
· Change Standard option manually if needed.
If nothing works
· If you have tried the above solutions and nothing seems to work, try switching your DVD off
and on again. If this does not work, contact your supplier or your initiating service. Never
attempt to repair a defective DVD recorder yourself.
Cut this information box out and
keep in a safe place.
If You Forget The Password:
Press 3, 3, 0, 8.
Then please set your personal password.
ENG - 41