Factory Defaults; Standby Time; Av-2; Divx Registration - Hyundai DVR 400 User Manual

CHANGE PASSWORD
You have to enter your password every time you want to watch a movie with a higher parental
setting or to change the parental level of the system.
To change the password, you will be prompted to enter your old password. After that, it
becomes possible to enter a new 4-digit password.
Enter password: Enter your current password(four numbers you previously set in here)
Enter new password: Enter your choice for a new password.
Confirm new password: confirm new password by entering again. Select "OK".
NOTE: Do not forget your password. Otherwise you can use the password at last page, to enter
this menu.

2.2.6.3 FACTORY DEFAULTS

When you choose Factory Defaults option, after resetting all your Setup options back to factory
settings, the device will restart itself automatically and first time installation will be displayed.
This operation will take approximately 15 to 20 seconds.
CAUTION: Parental level and parental password do not change. During this operation, there is
no message in device display.

2.2.6.4 STANDBY TIME

You can set the standby time as 5, 15 or 30 minutes or set it off by choosing "Off" option from
the menu. The unit goes to standby state if one of the time options is selected and no key press
occurs for the selected time duration while in stop mode.
NOTE: In monitor mode,device will not switch to standby mode.

2.2.6.5 AV-2

2.2.6.6 DIVX REGISTRATION

This menu option allows you to watch DivX DRM
(Digital Rights Management) supported discs. When
you select this option, you will be given a DivX regis-
tration code.
According to the information on the screen you will
be able to watch DivX DRM discs.
The password for parental level can be set and chan-
ged by using this option.
The default password is: 0000.
You have to set a XXXX numeric password when it is
the first time to select a parental level.
This menu option allows you to set AV-2 as "Decoder" or
"SCART CVBS" output.
When "Decoder" option is selected, "SCART" is removed from
the available video sources list and an additional menu item
("Decoder On/Off") is added into "Modify Channel" menu.
In the "Modify Channel" menu, if you select Decoder option as
"On", you can watch scrambled channels with appropriate
decoder.
Otherwise, when "SCART CVBS" is selected, AV-2 continues to
stay in available sources list.
ENG - 25