Tv Display; Screensaver; Video Output Format; Audio - Hyundai DVR 400 User Manual

2.2.2.2 TV DISPLAY

TV Display controls the presentation of the picture on the screen.
4:3 PS: (Normal/PS Pan & Scan)
Allows the movie to fill the entire screen of your TV, but not the right and left edges.
4:3 LB: (Normal/LB Letterbox (4x3))
Allows you to see movies in their original aspect ratio. You will see the entire frame of the movie,
but it will occupy a smaller portion of the screen.
16:9 WS: (Wide Widescreen (16x9))
Choose this setting if your DVD recorder is connected to a widescreen TV.
NOTE:
Depending on the format of the DVD disc, e.g. 2.35:1 the picture may still have black lines abo-
ve and below the picture.

2.2.2.3 SCREENSAVER

This menu option allows user to activate screensaver while the unit is not in use for a while.

2.2.2.4 VIDEO OUTPUT FORMAT

This menu item enables user to select video output as either "Progressive" or "Interlaced".
When progressive option is selected, a confirmation message will be displayed. If user does not
press any key to confirm, selection will be discarded after a while.
NOTE:
You can only get progressive output with progressive TV set, otherwise you will not get video
properly. If your selection and the TV set does not match please use the shortcuts below in
monitor mode:
CLEAR, CLEAR, 5: Switch to progressive
CLEAR, CLEAR, 6: Switch to interlaced

2.2.3 AUDIO

2.2.3.1 DOWNMIX

Downmix means mixing 5.1 channels down to two
channels. When Downmix is "Off" you will see all
possible settings for 5.1 speaker systems. Set these
options to agree with the speakers installed in your
home entertainment system.
Stereo: Two channels stereo. Use this option if you
have a stereo TV or a HI-FI stereo system.
Surround: Surround encoded output.
ENG - 22