Timer Recording; General Information; How To Create Recording Item; How To Check, Change Or Delete A Programmed Recording (Timer) - Hyundai DVR 400 User Manual

5. TIMER RECORDING

5.1 General Information

You can use programmed recording (timer) to automatically start and stop a recording at a later
time.
The DVD Recorder will switch to the selected program number and begin recording at the
selected time.
To make a programmed recording, your DVD recorder needs to know:
- the program number of the TV channel
- the recording quality (HQ, SP, LP, EP, SLP)
- the mode of the recording (once, daily, weekly)
- the date you want to make the recording
- the start and stop time of the recording
NOTE : At least 1 min is required between two succeeding record settings.

5.2 How To Create Recording Item

· Press TIMER key on the remote control or select Timer Setting Menu
from Setup menu
· Press SELECT on the first blank item to program recording
· Set the source of recording
· Set the quality of recording
· Set the mode of recording
· Set the recording time (start and stop time for recording process)

5.3 How To Check, Change or Delete A Programmed Recording (Timer)

· Switch on the TV set.
· Press TIMER key on the remote control or select Timer Setting Menu
from Setup menu.
· In order change any parameter of the recorded item, choose the related
record item, press SELECT key, a popup menu will appear, you can edit
from here in order to change any field.
· To delete the record item, repeat the steps 1 and 2 focus on
the related item, press CLEAR key; the record item will be
deleted from the list.
NOTE:In order to activate timer recording, unit should be set to normal STANDBY state. If unit
is already turned on manually at the start time of a timer event, timer recording won't work.
6. DV

6.1 PLAYBACK FROM DV INPUT

You can connect a camcorder or digital camera to DV input of the unit's front panel. For play-
back, you must connect the device to the recorder and press VIDEO SOURCE key until swit-
ching to the right source. First you will see a blank screen. You can do playback operations like
play, pause, stop, fast forward/backward, forward, rewind etc. using your remote control or the
device itself. If the DV device is a camcorder, you can view camera mode with this connection
on TV screen.
NOTE: Some DV compliant devices may not be supported.

6.2 RECORDING FROM DV INPUT

Recording from DV input is also available. For this operation you must switch to DV source with
the VIDEO SOURCE key on the remote control. You can record content of the DV device or the
camera mode of the DV device to a DVD disc. Recording operations like record, pause, stop,
etc. are the same with steps explained in Manual recording section.
NOTE: Some DV compliant devices may not be supported.
ENG - 36