Recording Setup; Selecting Source; How To Initiate And Stop Recording Process; How To Watch Another Channel At Tv During Recording - Hyundai DVR 400 User Manual

4.2 Recording Setup

From the setup menu, choose Recording to set up the recording quality and auto chaptering
periods. Recording qualities that may be chosen are: HQ (High Quality), SP (Standard Play), LP
(Long Play), EP (Extended Play), SLP (Super Long Play). You can also change record qualities
by pressing RECORD MODE key on the remote control.
Auto chapter durations are: 5, 10, 20, 30 minute, it can be deactivated also by choosing OFF.

4.3 Selecting Source

Video input source modes: TV Tuner, SCART, Front CVBS, Front S-Video, DV. Please checkout
your setup before starting a record process and assemble the correct configurations for starting
record process.
Press VIDEO SOURCE on the remote control. The type of source changes for every press of
the VIDEO SOURCE key.

4.4 How To Initiate And Stop Recording Process?

After being sure about your device setup and general recording setup, be sure there is a
recordable DVD in tray. Now you are ready to record. Then press RECORD key on your remo-
te control or front panel of device. Recording process will start. To stop the recording process,
press STOP button.
OTR (One Touch Recording)
Every press of RECORD key will increase recording time for 30 minutes after recording has
been
started. The timer list is circular so after the maximum recording time, it returns back to the
beginning.
OTR time periods are followed as:
HQ: 30 min, 60 min
SP: 30 min, 60 min, 90 min, 120 min
LP : 30 min, 60 min, 90 min, 120 min, 180 min
EP : 30 min, 60 min, 90 min, 120 min, 150 min, 180 min, 210 min, 240 min
SLP : 30 min, 60 min, 90 min, 120 min, 150 min, 180 min, 210 min, 240 min, 270 min, 300 min,
330 min, 360 min

4.5 How To Watch Another Channel At TV During Recording?

This feature is valid only for scart connection to TV. Press TV/DVD key on remote control. This
will disable the scart output of the unit. By using program 5/ 6 or numerical keys of your TV
remote control and press SELECT, you can watch other channels. In order to enable the scart
output of the DVD recorder, press TV/DVD key again.

4.6 Inserting Chapter

INSERT CHAPTER key on the remote control divides current chapter into two chapters from the
moment you press this key.

4.7 Pause Recording

In order to pause recording process, press PLAY/PAUSE( ) key.
Press RECORD key to resume recording.
ENG - 35