Related Manuals for Hyundai HY-DVDR
Summary of Contents for Hyundai HY-DVDR
- Page 1 DVD + H.D.D.VIDEO RECORDER HY-DVDR INSTRUCTION MANUAL Please read the I/M carefully before connection 03-9-16, 15:18 DVR-˵Ã÷Êé.p65...
-
Page 2: Table Of Contents
REPEAT ---------------------------------------------- 14 CLEAR ------------------------------------------------ 14 P/N ----------------------------------------------------- 14 GO TO ------------------------------------------------ 14 TITLE (For DVD Only) ----------------------------- 14 DVR-˵Ã÷Êé.p65 CHAPTER (For DVD Only) ----------------------- 14 SUB-T ------------------------------------------------- 14 BOOK/MARK ---------------------------------------- 14 AUDIO SETTING(For VCD Only) ---------------- 14 2. Receive TV Programs -------------------------- 14... -
Page 3: Safety Information
SAFETY INFORMATION Dear customers, We take this opportunity to thank you for purchasing this DVR/DVD/VCD /CD Recorder player. We strongly recommend that you study carefully the operation instructions before attempting to operate the unit and that you have noted the listed precautions. -
Page 4: Features
AC power cord away from heating appliances. uNever put any heavy object on the AC power cord. uDo not attempt to repair or reconstruct the AC power DVR-˵Ã÷Êé.p65 PRECAUTIONS cord. uRemove the dust, dirt, etc. on the plug at regular intervals. -
Page 5: Accessories
FRONT PANEL 1. STANDBY switch 2. Disc tray 3. Remote Control Sensor 4. VFD display 5. Channel+/- button 6. OPEN/CLOSE button DVR-˵Ã÷Êé.p65 7. PLAY button 8. STOP buiion 9. REC button 10. DVD button 11. TV/AV button 12.TIME SHIFT button... -
Page 6: Rear Panel
16. AV channel right input jack 17.AC Power Cord Note: Take out the plug and keep the power cord well when the player is idle for a long period in order to avoid electricity leakage and shock resulted from scratched power cord DVR-˵Ã÷Êé.p65 03-9-16, 15:18... -
Page 7: Remote Control
31.R/L button 32.CLEAR button 33.P/N button 34.PBC mode button 35.GO TO button 36.ANGLE button 37.CHAPTER button 38.PROG button 39.POWER button 40.DIGEST button 41.REPEAT button Note: The same button on remote control and front panel have the same functions. 03-9-16, 15:18 DVR-˵Ã÷Êé.p65... -
Page 8: Panel Display
5. VCD/ CD disc mode indicator 6. Record indicator 7. Time shifting indicator 8. SP (Standard recording mode) indicator 9. LP (Long play recording mode) indicator DVR-˵Ã÷Êé.p65 10. Playback running indicator 11. DTS indicator 12. Dolby digital indicator 13. 14.TITLE Display or chapter Display 15. -
Page 9: Basic Connection
A: Connecting to TV set 1. TV set (not included) 2. DVR Record player 3. To S-video input connector of TV set (not included) 4. 75ohm Antenna input jack (antenna cable not included) 5. Video/Audio cord 6. - Page 10 BASIC CONNECTION C: Connecting to AV amplifier with 5.1 channel input connector supporting Dolby AC-3 or MPEG2 This DVR Recorder Player contains a Dolby(AC-3) or MPEG2 decoder.this enables the playback of DVR Recoder with Dobly digital,MPEG1/2 audio or linear PCM processing.When the player is connected to an AV...
- Page 11 Digital(AC-3) or MPEG audio decoder otherwise it may be harmful to your ears and destroy your speakers. uChoose “RAW” in the digital audio setup to effect Opti- cal/ Coaxial digital output when playing disc with DTS output or Dolby digital ouput DVR-˵Ã÷Êé.p65 03-9-16, 15:18...
-
Page 12: Remote Control Preparation
03-9-16, 15:18 DVR-˵Ã÷Êé.p65... -
Page 13: Operation
PLAY button on the player or remote control. Note: Some discs including MP3 disc have no such function. DVR-˵Ã÷Êé.p65 SLOW Press SLOW button on remote control during playback of a disc and the unit works slow playing. There are 3 levels of speed available:1/2, 1/4,1/8. -
Page 14: Display
ENTER to confirm the setup Note: Some discs have no such function. DVR-˵Ã÷Êé.p65 TITLE (DVD Only) Press TITLE button on remote control when during playback,a title list on the disc (depends on discs)will be displayed on TV monitor. -
Page 15: Record
SEP(poor) 49:19:45 PROG Press PROG button to access to the recorded program when the unit is not in the DVR playing status. And select it by direction button and ENTER button. And press STOP button to stop playbacking it. SETUP... -
Page 16: Tv Channel Manager
6. POWER ON MODE It is a setup to decide which status the unit is in when power on NORMAL MODE: After started, the unit is in DVR starting status, and the starting image is shown on the screen. TIME SHIFTING: Under this setup, the unit will be in the TIME SHIFTING status when power on. -
Page 17: Appendix
DVD. 2.What is DVR? The DVR adopts hard disc as the signal storage media. It also adopts real-time capture, real-time compression, and real-time coding and storage technologies for analogue video signal to realize the large capacity and... - Page 18 First, please confirm the proper connection between DVR and TV. Then, turn on the TV power. If your DVR output signal has been connected to AV IN(such as AV 1 input terminal) of the TV, please switch your TV to AV 1 input status.
-
Page 19: For Your Reference
+ 0.2/-0.8Vrms (1KHz OdB) udistortion: 0.2%(JIS-A 1KHz.) dymamic range 80dB (JIS-A 1KHz.) uS/N ratio 90dB(JIS-A 1KHz.) Digital audio output: Coaxial/Optical digital output. DVR-˵Ã÷Êé.p65 TV tuner uTV receive system:PAL B/G antenna impedance:75 utune receive frequency: VHF-L:46.25~168.25MHz (no condensation) VHF-H :175.25 ~447.25MHz UHF:455.25 ~855.25MHz... -
Page 20: Troubleshooting
Change the disc with a new one Please refer to the function operation instruction carefully connection improper Please connect the DVR according to the diagram. Please connect the audio cable to the DVR according to diagram. Try another DVD Try another VCD/CD Power off and then power on.