Preparing The Descaling Process; Starting The Descaling Process - Miele H6890BP Operating And Installation Instructions

Cleaning and care

Preparing the descaling process

We recommend using the descaling
tablets supplied. They have been
specially developed for Miele for
optimum cleaning results.
Other descaling agents, which
contain other acids besides citric
acid and/or other undesirable
substances, such as chlorides for
example, could cause damage.
Moreover, the descaling effect
required could not be guaranteed if
the descaling solution was not of the
appropriate concentration.
Miele descaling tablets are available to
order from Miele or via the internet at
www.miele-shop.com (depending on
country).
You will need a container of approx.
1 litre capacity.
Follow the instructions for the mixing
ratio carefully. Otherwise the oven
will be damaged.
^ Dissolve one descaling tablet in
approx. 600 ml of cold mains tap
water.
^ Make sure the plastic tube with
suction cap supplied is to hand.
132

Starting the descaling process

A Touch Maintenance y.
B Touch "Descale".
If the Moisture Plus d function and
the Automatic programmes that use
moisture are already locked, the
descaling process can be started
immediately by touching the OK
sensor.
C Push the universal tray into the top
shelf level as far as it will go to
collect the descaling solution after it
has been used. Touch OK to confirm
the message.
D Place the container with the
descaling solution on the floor of the
oven.