Miele H6890BP Operating And Installation Instructions page 137

Hide thumbs Also See for H6890BP:
Table of Contents

Advertisement

Problem
The oven does not heat
up.
"Power cut – Process
cancelled" appears in
the display.
12:00 appears in the
display.
The message
"Maximum operating
hours reached" appears
unexpectedly in the
display.
"; Fault XX" appears in
the display.
Possible cause and remedy
^ Check whether "On" has been selected for the Demo
mode (see "Settings – Showroom programme").
If the Demo mode has been switched on, the oven can
be operated but it will not heat up.
^ Deactivate Demo mode.
There has been a power cut which has caused a
current cooking process to stop.
^ Switch the oven off and then back on again.
Start the cooking process again.
The power supply was interrupted for longer than
200 hours.
^ Reset the time and date.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Select OK. Touch # to delete "Process finished". The
oven will then be ready for use again.
There is a problem that you cannot resolve.
^ Call Miele.
Problem solving guide
137

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents