DFI AD73 Pro User Manual page 35

®
VIA Service Pack Installation Notes
The "AGP VxD Driver" and "VIA INF Driver" drivers in the "VIA
Service Pack" are supported in Windows
®
Windows 98 SE, Windows
You must first install VIA
drivers. However, this may not be the case for some AGP cards.
Please read carefully the following information.
Important:
The VGA driver that came with some AGP cards is already
bundled with the AGP VxD driver. Since the version of the
bundled VxD driver may be older than the one provided in the
CD, installing the bundled VxD driver may cause problems. If
you are using this type of card, we recommend that you install
first the AGP card's VGA driver before installing the VIA Service
Pack.
To install the VIA Service pack, please follow the steps below.
1. Insert the CD that came with the system board package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click "VIA Service Pack".
3. The "Welcome" screen will appear. Click "Next". Please read the
"VIA Service Pack readme" carefully before proceeding to step 4.
4. Follow the prompts on the screen to complete the installation.
5. Reboot the system for the drivers to take effect.
2.5.3 Audio Drivers and Software Applications
The CD in the system board package also includes audio drivers
and audio playback software for Windows

Windows 98 SE, Windows
2000 operating systems. For installation instructions or information
about their corresponding "readme", click the "Read Me" button in
the autorun screen. The autorun screen normally appears after the
CD is inserted into a CD-ROM drive.
®
ME and Windows
®
Service Pack prior to installing any other

ME, Windows NT
English
® ®
95, Windows 98,
®
2000.
 
95, Windows 98,

4.0 and Windows
2

35