Comtrend Corporation VR-3030 User Manual page 48

Multi-dsl router
Hide thumbs Also See for VR-3030:
Table of Contents

Advertisement

To remove an entry, tick the corresponding checkbox  in the Remove column and
then click the Remove Entries button, as shown below.
Heading
Enable RADVD
RA interval Min(sec):
RA interval Max(sec):
Reachable Time(ms):
Default Preference:
MTU (bytes):
Enable Prefix Length Relay
Enable Configuration Mode
Enable ULA Prefix Advertisement
Randomly Generate
Statically Configure Prefix
Statically Configure
Preferred Life Time (hour)
Valid Life Time (hour)
Enable MLD Snooping
Description
Enable use of router advertisement daemon
Minimum time to send router advertisement
Maximum time to send router advertisement
The time, in milliseconds that a neighbor is
reachable after receiving reachability
confirmation
Preference level associated with the default
router
MTU value used in router advertisement
messages to insure that all nodes on a link use
the same MTU value
Use prefix length receive from WAN interface
Manually configure prefix, prefix length,
preferred lifetime and valid lifetime used in
router advertisement
Allow RADVD to advertise Unique Local Address
Prefix
Use a Randomly Generated Prefix
Specify the prefix to be used
The prefix to be used
The preferred life time for this prefix
The valid life time for this prefix
Enable/disable IPv6 multicast forward to LAN
ports
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents