To add a WAN connection go to
E1.2 PTM Interfaces
Follow these procedures to configure a PTM interface.
NOTE:
The VR-3030 supports up to four PTM interfaces.
STEP 4: Go to Basic Setup
drop-down menu.
This table is provided here for ease of reference.
Heading
Interface
DSL Latency
PTM Priority
Connection Mode
E2 ~ WAN Connections
WAN Setup Select PTM Interface from the
Description
WAN interface name.
{Path0} portID = 0
{Path1} port ID = 1
{Path0&1} port ID = 4
Normal or High Priority (Preemption).
Default Mode – Single service over one interface.
Vlan Mux Mode – Multiple Vlan services over one interface.
122
WAN Connections.