Table of Contents
Advertisement
IGMP Snooping:
Standard Mode: In standard mode, multicast traffic will flood to all
Blocking Mode: In blocking mode, the multicast data traffic will be
Enable LAN side firewall: Enable by ticking the checkbox .
DHCP Server: To enable DHCP, select Enable DHCP server and enter Start and
End IP addresses and the Leased Time. This setting configures the
router to automatically assign IP, default gateway and DNS server
addresses to every PC on your LAN.
Setting TFTP Server: Enable by ticking the checkbox . Then, input the TFTP
Static IP Lease List: A maximum of 32 entries can be configured.
To add an entry, enter MAC address and static IP address and then click
Apply/Save.
To remove an entry, tick the corresponding checkbox in the Remove column and
then click the Remove Entries button, as shown below.
bridge ports when no client subscribes to a multicast
group – even if IGMP snooping is enabled.
blocked and not flood to all bridge ports when there are
no client subscriptions to any multicast group.
server address or an IP address.
43
Hide quick links:
Advertisement
Table of Contents
