Table of Contents
Advertisement
5.1.1 WAN Service Setup
This screen allows for the configuration of WAN interfaces.
Click the Add button to create a new connection. For connections on ATM or ETH
WAN interfaces see
To remove a connection, select its Remove column radio button and click Remove.
Heading
Interface
Description
Type
Vlan8021p
VlanMuxId
IGMP
NAT
Firewall
IPv6
MLD
Remove
To remove a connection, select its Remove column radio button and click Remove.
NOTE:
ETH and ATM service connections cannot coexist. In Default Mode, up to
8 WAN connections can be configured; while VLAN Mux Connection Mode
supports up to 16 WAN connections.
NOTE:
Up to 16 PVC profiles can be configured and saved in flash memory.
Also, ETH and PTM/ATM service connections cannot coexist.
Appendix E - Connection
Description
Name of the interface for WAN
Name of the WAN connection
Shows the connection type
VLAN ID is used for VLAN Tagging (IEEE 802.1Q)
Shows 802.1Q VLAN ID
Shows Internet Group Management Protocol (IGMP) status
Shows Network Address Translation (NAT) status
Shows the Security status
Shows the WAN IPv6 address
Shows Multicast Listener Discovery (MLD) status
Select interfaces to remove
Setup.
33
Hide quick links:
Advertisement
Table of Contents
