Milk Flask And Lid - Miele CVA 6405 Operating Instructions Manual

^ Fill the water container up to the 8
mark with lukewarm water and stir the
solution.
Follow the instructions on the packet
carefully. It is important that you fill
the water container with enough
water. Otherwise the milk pipework
will not be cleaned properly.
^ Replace the water container in the
coffee machine and close the front.
^ Follow the instructions in the display.
When "Empty the water container and
refill it with fresh tap water" appears in
the display:
^ remove the water container and rinse
it carefully with clean water. Make
sure that no cleaning agent is left in
the water container. Fill the water
container with fresh tap water and
replace it in the machine.
"Prog. finished" will appear in the
display to indicate that cleaning has
been completed.
Cleaning and care

Milk flask and lid

It is important to keep the neck and
flange of the flask clean (whilst filling it
and carrying it). If the flask is dirty it
could cause a fault with the machine.
^ Clean the milk flask holder on the
coffee machine with a damp cloth.
^ Clean the glass milk flask in the
dishwasher or by hand using hot
water and a little washing-up liquid.
Dry the milk flask thoroughly.
Before placing the lid of the milk flask
in the dishwasher:
^ Rinse the milk pipework in the lid
under running water.
If when doing this, no water runs out of
the milk pipework a,
^ clean the lid as described in
"Cleaning blockages from the milk
pipework - Step 1: Cleaning the milk
pipework in the lid of the milk flask".
53