Machine Front - Miele CVA 6405 Operating Instructions Manual

^ Switch the machine on with the On/
Off sensor K.
^ Touch x .
^ Touch the Y arrow until
"Maintenance" is highlighted.
Touch the OK sensor.
^ Touch the arrow sensors until
"Degrease the brew unit" is
highlighted in the display. Touch the
OK sensor.
The cleaning process cannot be
cancelled once it has started. The
process has to be carried through to
the end.
^ Touch the OK sensor.
^ Follow the instructions in the display.
When "Place a cleaning tablet in the
ground coffee chute and close the
chute" appears in the display:
^ Remove the coffee chute cover and
open the lid of the coffee chute.
^ Place a cleaning tablet into the coffee
chute.
^ Close the lid, replace the coffee
chute cover and close the machine
front.
Cleaning and care
^ Follow the instructions given in the
display.
When "Prog. finished" appears in the
display:
^ touch the OK sensor.
The brew unit has now been cleaned.

Machine front

If soiling is not removed promptly it
could cause the surfaces of the
machine to alter or discolour.
Remove any soiling immediately.
Make sure that water cannot get in
behind the display.
All external surfaces are susceptible
to scratching. Scratches on glass
surfaces could even cause a
breakage.
Contact with unsuitable cleaning
agents can discolour the surfaces.
Wipe up any spillages or splashes
of descaling agent immediately.
^ Switch the machine off with the On/
Off sensor K.
^ Clean the front with a clean sponge
and a solution of hot water and
washing-up liquid. Dry using a soft
cloth.
Tip: You can also use a microfibre
cloth to clean the front.
61