Milk Flask And Lid - Miele CVA 6805 Operating And Installation Instructions

^ Fill the water container up to the 8
mark with lukewarm water and stir the
solution.
Follow the instructions on the packet
carefully. It is important that you fill
the water container with enough
water. Otherwise the milk pipework
will not be cleaned properly.
^ Replace the water container in the
coffee machine and close the front.
^ Follow the instructions in the display.
When "Fill and replace the water
container" appears:
^ Remove the water container and
rinse it carefully with clean water.
Make sure that no cleaning agent is
left in the water container. Fill the
water container with fresh tap water
and replace it in the machine.
The cleaning process is complete when
"Remove container. Process finished"
appears.
Cleaning and care

Milk flask and lid

It is important to keep the neck and
flange of the flask clean (whilst filling it
and carrying it). If the flask is dirty it
could cause a fault with the machine.
^ Clean the glass milk flask in the
dishwasher or by hand using hot
water and a little washing-up liquid.
Dry the milk flask thoroughly.
Clean the lid of the milk flask by
hand only.
^ Rinse the milk pipework in the lid
under running water.
If when doing this, no water runs out of
the milk pipework a,
^ clean the lid as described in
"Cleaning blockages from the milk
pipework - Step 1: Cleaning the milk
pipework in the lid of the milk flask".
55