Degreasing The Brew Unit - Miele CVA 6405 Operating Instructions Manual

Built-in
Table of Contents

Advertisement

Cleaning and care
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
"Problem solving guide").
When the brew unit has been pulled
out, do not alter the position of the
brew unit handle. This would
displace the brew unit and it would
not fit back into the coffee machine.
^ Clean the brew unit by hand under
hot running water without using
washing-up liquid or any other
cleaning agent.
^ Wipe any remaining coffee off the
filters. One filter is located in the
funnel and the other to the left of the
funnel.
^ Dry the funnel to prevent ground
coffee sticking to it.
^ Clean the inside of the coffee
machine. Use your vacuum cleaner
to remove dry coffee grounds.
To replace the brew unit proceed in the
reverse order:
^ Push the brew unit back into the
coffee machine, making sure it is
straight.
60
^ Press the button under the handle of
the brew unit a and whilst doing so
turn the handle anti-clockwise b.
^ Close the front.

Degreasing the brew unit

Depending on the natural oil content of
the coffee used, the brew unit can
become blocked quite quickly.
Therefore use the cleaning tablets
supplied to clean the brew unit.
These have been specially formulated
for use in this coffee machine and are
available to order from Miele (see back
page for contact details), your Miele
dealer or via the internet at www.miele-
shop.com.
After 200 portions have been
dispensed, "Degrease the brew unit"
will appear in the display. This
message will not go out until
degreasing has been carried out.
Degrease the brew unit regularly.
This is necessary to ensure that the
coffee machine continues to
dispense excellent coffee and to
operate problem-free.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents