Installation; Connecting The Mobile Linc-Up To A Phone - Black Box MC115A User Manual

MOBILE LINC-UP

3.1 Connecting the Mobile Linc-Up to a Phone

1. Remove the spiral handset cord from the
handset jack on the telephone base unit and
insert it into the Mobile Linc-Up jack labeled
HAND SET. (See Figure 3-1.)
2. Insert the Mobile Linc-Up modular telephone
cord (which is permanently attached at one end
to the Mobile Linc-Up) into the handset jack on
the telephone base unit.
3. Connect a modular telephone cord from your
modem, fax/modem, or fax machine jack
labeled "Telco," "Line," or "Wall" to the Mobile
Linc-Up jack labeled DATA.
4. For AC adapter operation, connect the round
end of the supplied AC adapter to the DC
connector next to the DATA jack and the
other end to an AC outlet.
The Mobile Linc-Up will operate from either the supplied AC
adapter or two 9v DC batteries.
5. Set the Level switch on the bottom of the Mobile
Linc-Up to 3. For more information on the
switch, refer to Chapter 4.
12

3. Installation

NOTE