5.3 Dialing Fax Calls Manually
If the digital telephone connected to your Mobile
Linc-Up does not support autodialing, use the
following procedure to dial fax calls manually.
If your fax software supports a manual fax feature,
you can use that procedure instead of the following
to dial fax calls manually.
1. Prepare your fax/modem or fax machine for
sending.
2. Lift the telephone handset and listen for a dial
tone. Leave the handset out of the cradle. Do not
hang it up, or you will terminate the call.
3. Press the Enter key on your computer keyboard if
you are using a fax/modem.
Or, press the Start button on your fax machine.
4. Use the telephone keypad to dial the remote fax
telephone number.
5. When you finish, return the handset to the
cradle.
6. To hang up a fax/modem, use your software's
call-termination feature, or type ATH0 and press
Enter from direct connect mode.
Or, to hang up a fax machine, press its Stop
button.
CHAPTER 5: Sending Data and Faxes
31