Table of Contents
Advertisement
MOBILE LINC-UP
• If your modem looks for a dial tone and your
communication software prevents you from
editing the Dial command line or
initialization string, press Enter on your
computer keyboard. Immediately after the
modem finishes dialing, use the telephone
keypad to dial the Host number.
Either step should allow your modem to connect
with the remote modem.
To operate properly, your modem must go off-hook in
originate mode—even though you manually dialed the
remote modem's telephone number.
5. Perform the data transfer. When you finish,
return the handset to the cradle.
To hang up, use your communication software's
call-termination feature, or type ATH0 and press
Enter from direct connect mode.
The telephone handset is electronically
disconnected when the modem goes off-hook.
You must hang up your modem to restore use
of your telephone handset.
30
Advertisement
Table of Contents
